2023 CAT TL 1055 (10K)

2023 Caterpillar TL 1055 (10K)

Engine
Engine Model Cat® C3.6L*
Gross Power - Basic 134 hp
Note *Meets U.S. EPA Tier 4 Final emission standards.
Operating Specifications
Rated Load Capacity 10000 lb
Maximum Lift Height 54.9 ft
Maximum Forward Reach 42 ft
Top Travel Speed 21 mile/h
Capacity at Maximum Reach (o/r Down) 2500 lb
Drawbar Pull - Loaded 26510 lbf
Capacity at Maximum Height (o/r Down) 5000 lb
Frame Leveling 10°
Maximum Lift Height (o/r Down) 54.9 ft
Turning Radius - Over Tires 14.1 ft
Maximum Rated Load Capacity 10000 lb
Operating Weight 31700 lb
Hydraulic System
Pump Type Variable displacement load sensing axial piston pump
Auxiliary Hydraulic Pressure 3307 psi
Auxiliary Hydraulic Flow 25 gal/min
Service Refill Capacities
Fuel Tank 38 gal (US)
Diesel Exhaust Fluid (DEF) Tank 5.7 gal (US)
Hydraulic System 49 gal (US)
Axles
Types (1) Trunnion mounted planetary 55-degree steer axles
Types (2) High bias limited slip differential on front axle
Braking System
Service Brakes Inboard wet disc brakes on front and rear axles
Parking Brakes Wet disc, spring applied hydraulic release on front axle
Transmission Speeds
Forward 4 Speeds
Reverse 3 Speeds
Tires
Standard 400/75-28 Duraforce Air
Optional 400/75-28 Duraforce Foam; 360/85-28 Telemaster Solid; 14.00-24 16PR Air; 14.00-24 12PR Foam; 400/75-28 Non-Marking Air; 400/75-28 Non-Marking Foam
Boom Performance
Boom Up 15 s
Boom Down 13 s
Tele In 15.3 s
Tele Out 19.7 s
Optional Work Tool Attachments
Carriages: Standard Tilt - Option 3 72 in
Fork Mounted - Work Platform 1220 mm × 2438 mm (4 ft × 8 ft)
Carriages: Standard Tilt - Option 1 50 in
Forks: Pallet - Option 2 60 in
Carriages: Side Tilt - Option 1 50 in
Truss with Winch - Option 1 3 ft
Truss with Winch - Option 2 12 ft
Carriages: Dual Hydraulic Fork Positioner - Option 1 50 in
Buckets: Multi Purpose 1.3 yd³
Carriages: Dual Hydraulic Fork Positioner - Option 2 72 in
Forks: Pallet - Option 3 72 in
Material Handling Arm Adjustable 2-4 m (Adjustable 6.7-13.2 ft)
Forks: Lumber 60 in
Forks: Pallet - Option 1 48 in
Carriages: Swing, 100° 72 in
Fork Extensions* 90 in
Buckets: General Purpose - Option 2 2 yd³
Buckets: Grapple 1.7 yd³
Carriages: Standard Tilt - Option 2 60 in
Fork Mounted - Hook Lifting Hook
Carriages: Side Tilt - Option 2 72 in
Truss Booms - Option 2 15 ft
Forks: Block/Cubing 48 in
Buckets: General Purpose - Option 1 1.3 yd³
Note *For use with 1525 mm (60 in) forks or larger
Truss Booms - Option 1 12 ft
Carriages: Side Shift 50 in
Fork Mounted - Truss Boom Adjustable 2.1-3.6 m (Adjustable 7-12 ft)
Coupler Hydraulic IT Coupler (Includes Auxiliary Electronics)
Fork Mounted - Hopper Trash Hopper
Weights
Operating Weight 31700 lb

•